HWRS6617-1 is a local heat-shrinkable tube heater. Designed for batch production, it can work continuously for 24 hours to process special products. Heater and conveyor can be used together to realize local heating of heat shrinkage pipe without damaging the line. By adjusting the speed manually, the speed of the conveyor belt is kept uniform. The vertical distance and parallel distance from the heating port to the conveyor belt can be adjusted, which is suitable for the heat shrinkage of different size components. It is suitable for users who have strict requirements on wire harness heating, and also for heating high temperature resistant Teflon heat shrinkable tubes.
Suitable for heat shrinkage of heating thin wire harness
The heating position is adjustable, and local heating does not damage the line
The vertical and parallel distance between heater and conveyor belt can be adjusted, which is suitable for heating shrinkable tubes with different size components. Energy saving, no damage to the line.
Heat Insulation and Insulation of Heater
Double-layer thermal insulation, strong casing safe and reliable, can maintain high temperature for a long time.
Digital Chinese character menu operation, simple and convenient operation, real-time display of temperature.
Temperature Control System (Room Temperature~200 C)
The power output is controlled by digital stepless mediation, and the temperature is controlled. The output is stable and the error of temperature control is (+2 C).
It is equipped with overheating and overload protection and power-off protection device, which does not produce exhaust gas and conforms to environmental protection. It can operate 24 hours a year without interruption.
Selection of auxiliary conveyor
This machine can be used with auxiliary conveyor to heat and shrink shrinkage tubes of wire harness of any size.
|Profile Size (L × W × H) (mm)||See picture|
|Packaging Size (L × W × H) (mm)|
|Heating width (mm)||10-400|
|Conveying width (mm)||＜660|
|Net weight (KG)|
|Gross Weight (KG)|
|Power of Conveyor Motor(W)||25|
|Whole Machine Power (KW)||2|
|Suggested range of wire harness parameters|
|Machining Wire Harness Diameter (mm)||＜18|
|Length of Heated Shrinkage Casing (mm)||＜170|
|Heating mode: thermal radiation||S|
|Conveying speed 1~3m/min||S|
|Conveying speed 1~5m/min||O|
|HW220V Standard Temperature Controller|
|Digital display temperature||S|
|Temperature control mode:Automatic solid state voltage regulation||S|
|ZH220V Intelligent Temperature Controller|
|Control mode: thyristor||O|
|Start-up Preset: Output Temperature, Working Time||O|
|Automatic fault detection and alarm||O|
|Remote RS-485 Communication Interface||O|
|Safety Grade PE||S|
|power demand 220V，50Hz||S|
|S = standard configuration; O = optional; empty = none.The above parameters are for reference only. The actual data of our company’s products are final.|