HWIR900F-1 industrial hot air blower is suitable for heating, drying and dehumidifying industries, As well as the heating and heating of large space, the drying of clothes, shoes and utensils,winter heating rooms and other industries, such as heating, thawing, defrosting, drying and dehumidifying industries. Small size, light weight and easy to move. High thermal efficiency, continuous work without interruption, durable and accurate temperature control.
Characteristics of hot air blower:
Heat insulation of hot air blower
Multi fiber insulation cotton insulation, and the strong machine casing makes it safe and reliable,can maintain long-term high temperature work.
Temperature regulation of hot air blower(room temperature ~350 ℃)
The air outlet is equipped with a temperature sensor, so that the machine can adjust the temperature according to needs, and the temperature control accuracy is 1℃.
Term ordering detection function (preventing fan reversal)
This machine control system is equipped with motor item ordering sequence detection function.If the item ordering error,the item ordering warning indicator lights up.
Remote open control
This machine has a remote control interface, which can control the start and stop of the machine remotely.
Fan delay function
In order to protect the heating core and prolong the service life of the heating core, the machine has a time delay function of downtime and blow drying. After the machine stops working, the hair dryer will blow off for a minute before it can be shut down.
High heat exchange efficiency
Ingenious design of wind tunnel let the air uniform through the inside and outside of the helical heating wire.Heat exchange near 100%,the loss of wind pressure is less.The heating core of the hot air machine is designed to use the lower surface power density, and the heating temperature in the unit area is low, so the electric heat wire has a long service life.
Air flow regulating valve
The air inlet of the blower is equipped with a manual air volume regulating valve, and the air volume can be adjusted according to the needs.
It has overheating overload protection, power cut protection device, emergency stop switch, phase sequence protection, fully guarantee the safety of the equipment, do not produce exhaust gas, and meet the environmental protection.This machine can operate continuously for 24 hours all around the year.
|Profile Size (L × W × H) (mm)||see picture|
|Packaging Size (L × W × H) (mm)|
|Net weight (KG)||45|
|Gross Weight (KG)|
|Whole Machine Power (KW)||9.8|
|The outlet temperature of the maximum air volume is tested at room temperature of “0 ℃”||≤60℃|
|Air outlet diameter|
|Diameter of heating body|
|Multi-fibre insulation cotton insulation layer||S|
|Heating mode: resistance wire heating||S|
|Life (< 350 ℃) > 10000h||S|
|HW380V Standard Temperature Controller|
|Temperature control mode: solid state relay||S|
|Intelligent Temperature Control Meter||S|
|Input error alarm||S|
|Delayed heat exhaust during shutdown||S|
|Safe operating temperature <395℃||S|
|Temperature Control Accuracy ±3℃||S|
|750W centrifugal fan Air Volume:1350m³/h Air Pressure:930pa||S|
|Manual Air Volume Regulating Valve||0|
|Safety Grade PE||S|
|power demand 380V，50Hz||S|
|S = standard configuration; O = optional; empty = none.The above parameters are for reference only，Based on the actual product data of our company.|