HWIR2000F-5.5 industrial hot air blower, especially suitable for large diameter pipe drying, heating; suitable for beverage industry, dairy industry, pipe cleaning and drying. Small size, light weight and easy to move. The thermal efficiency is high, it can work continuously and continuously for 24 hours, durable and precise temperature control.
Inlet air interface
This machine adopts the locking type air inlet interface, wind regime selection performance.
Large selection of air volume
This machine can choose or assemble the wind regime by ourselves according to the needs, convenient and practical.
Double layer heat preservation,and the shell is very strong,it is safe and reliable when used,can keep high temperature work for a long time.
The outlet is equipped with a temperature sensor, which can adjust the temperature according to the needs.The precision of temperature control is 1.
Term ordering detection function (preventing fan reversal)
This machine control system is equipped with motor item ordering sequence detection function.If the item ordering error,the item ordering warning indicator lights up.
Remote open control
This machine has a remote control interface, which can control the start and stop of the machine remotely.
Fan delay function
In order to protect the heating core and prolong the service life of the heating core, the machine has a time delay function of downtime and blow drying. After the machine stops working, the hair dryer will blow off for a minute before it can be shut down.
High heat exchange efficiency
Ingenious design of wind tunnel let the air uniform through the inside and outside of the helical heating wire.Heat exchange near 100%,the loss of wind pressure is less.The heating core of the hot air machine is designed to use the lower surface power density, and the heating temperature in the unit area is low, so the electric heat wire has a long service life.
Air flow regulating valve
The air inlet of the blower is equipped with a manual air volume regulating valve, and the air volume can be adjusted according to the needs.
It has overheating overload protection, power cut protection device, emergency stop switch, phase sequence protection, fully guarantee the safety of the equipment, do not produce exhaust gas, and meet the environmental protection.
Optional wind regime
Centrifugal blower Medium pressure blower High pressure blower(standard configuration of this machine is 1500W medium pressure blower)
|Profile Size (L × W × H) (mm)||see picture|
|Packaging Size (L × W × H) (mm)|
|Net weight (KG)||168|
|Gross Weight (KG)|
|Whole Machine Power (KW)||26.1|
|The outlet temperature of the maximum air volume is tested at room temperature of “0 ℃”||≤55℃|
|Air outlet diameter|
|Diameter of heating body|
|Heating mode: resistance wire heating||S|
|Life (< 350 ℃) > 10000h||S|
|HW380V Standard Temperature Controller|
|Temperature control mode: solid state relay||S|
|Intelligent Temperature Control Meter||S|
|Input error alarm||S|
|Delayed heat exhaust during shutdown||S|
|Safe operating temperature <395℃||S|
|Temperature Control Accuracy ±3℃||S|
|ZH380V Intelligent Temperature Controller|
|Control mode: thyristor||0|
|Start-up Preset: Fan Speed, Output Temperature, Working Time||0|
|Temperature and Fan Speed Regulation||0|
|Dry Burning Detection||0|
|Automatic fault detection and alarm||0|
|Delayed heat exhaust during shutdown||0|
|Remote RS-485 Communication Interface||0|
|750W medium pressure blower Air Volume: 1170m³/h Air Pressure:2140pa||0|
|900W medium pressure blower Air Volume: 1320m³/h Air Pressure:2240pa||0|
|1500W medium pressure blower Air Volume: 1530m³/h Air Pressure:2400pa||0|
|5500W medium pressure blower Air Volume: 2700m³/h Air Volume:4700pa||S|
|Manual Air Volume Regulating Valve||S|
|Safety Grade PE||S|
|power demand 380V，50Hz||S|
|S = standard configuration; O = optional; empty = none.The above parameters are for reference only，Based on the actual product data of our company.|